How To Build a Cheap Wall Mount Fiber Box

So your installing fiber optic cable and don't want to spend $80+ on a wall mount fiber box enclosure. Let's say all you have is 6 strands of fiber your working with, or even less, maybe a 4 strand fiber. Or maybe it's going inside a closet where it wont be seen. No matter what the case, we have the perfect solution. A 6-port surface mount box. These are generally used for voice and data installations, but double perfectly as a wall mount fiber box at a fraction of the cost. Typically, savings will be between $75-$95, depending on the box. Let's take a look at what you need for a typical 6 strand fiber install. If your only using 4 strands, just change the quantity on the ST couplers and F-Connector inserts to 4. We still recommend using a 6 port box due to the size and cable distribution posts to wrap the fiber around.

What You Need:
Qty 1 - 6 Port Surface Box
Qty 6 - ST Coupler
Qty 6 - F-Connector Insert

Assembly is quick and only requires about 5-10 minutes. In this video, Mercy shows you what this all looks like. Enjoy



To order, simply click the links above, or visit Discount-Low-Voltage.com

Still have questions? Give us a call at (888) 797-3697

Want to make your fiber optic cable install even easier? Check out our Pre-Terminated Fiber Optic Cable Assemblies. These assemblies come ready to pull, in any length, with whatever connectors you need. Saves you from having to buy all those expensive fiber tools and comes with test results.

We hope this article on How To Build a Cheap Wall Mount Fiber Box helped you save some money. Were always interested in hearing about your ideas. If you have any tips or tricks on cost saving ideas, leave a comment below, we'd love to hear about them.